VonHaus TV Wall Bracket for 37-70" Screens, Ultra-Slim Flush TV Bracket, Picture Frame Flat to Wall Wire Mount, 50kg Capacity, Max VESA: 800x800mm

Product Information

Wires can prove a serious eyesore for wall-mounted TVs, and it’s often what puts people off installing their television on the wall. It's pretty discrete, with white-painted hardware and a cable management system which actually looks to have had some thought put into it, unlike those brackets which include flimsy plastic shrouds that pop off as soon as a wire is waved in their vague vicinity. If you really must install sockets behind your TV you should be able to save around half a cm by install flush type sockets instead of normal ones which sit a little bit away from the wall. You can install TV brackets on all types of wall, but it’s important to use the right wall anchors for each type (brick, stud, drywall).

uk/browse/technology/televisions-and-accessories/tv-wall-brackets/c:30111/bracket-type:flat%252Dto%252Dwall/" on this server. If your electrician or TV installer has installed you a mains point behind your TV to plug it in for when the TV is on the wall, it might be a better idea to install a fused spur instead.If you don't quite get the wall screws plumb, there's even a small degree of rotation in the bracket to ensure your screen is straight. Compatible with at least a 55-inch TV: TV screens are getting larger, and some TV manufacturers offer their higher-performance models only at 55 inches and higher. The VMPL50A-B1 is UL-approved, as well, so it’s certified to hold its claimed maximum weight of 150 pounds.

When not writing and testing the latest gadgets, you’ll find Jason playing the guitar or learning how to parent his new baby. These fully flexible, movable mounts offer a plethora of possibilities when it comes to positioning your screen, allowing you to extend out, tilt, turn and manoeuvre your TV into the exact orientation you desire. This could make all the difference when it comes to getting the TV as close to the wall as possible.

However, SAMSUNG reserves the right to remove or to refuse to post any submission for any reason in accordance with applicable law. In addition to drywall, this TV mount includes hardware for installation on 8"/12"/16" wood studs, concrete, brick, and block walls.

But if you have a TV with rear-facing inputs, there is a chance that you will have to remove the TV from the wall if you need to change any wiring.When choosing a TV look for models that have sideways connections on the back of the TV and not just straight out at right angles. You can install a brush faceplate to bring the cables out of to keep it looking neat but it is going to be behind the TV after all! and their respective officers, directors, and employees), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of any third party. Any software locks will be disabled, accounts will be removed and it will be factory reset before you ship it. Made from a sturdy alloy steel, it gives you full control over how you want your telly positioned – tilting up to eight degrees downwards, extending outwards up to 50 cm and swivelling horizontally by up to 160 degrees.

If you want the option of pulling the TV out from the wall and angling it toward your seat, we recommend the Sanus VLF728-B2 (also sold as the Sanus BLF328-B1), which works with TVs ranging from 42 to 90 inches. Because of their extending arms, these mounts are bulkier than tilting mounts, but some models can hold the TV as close to the wall as a tilting mount can. You mount four components to the VESA mounting holes on the back of your TV, the top two of which slot into corresponding brackets mounted on the wall, with the bottom two providing equal spacing. This will be quite difficult in a solid wall, in fact it would probably easier to build a frame around the TV, but if you have a hollow wall you could cut away a section of the plasterboard and install a piece of plywood fixed into the stud work. But not all brackets include the hardware to connect to every VESA size, which is issue number one, and issue number two is port access.SAMSUNG assumes no responsibility, and shall not be liable, in connection with whether any such products or services will be appropriate, functional or supported for the SAMSUNG products or services available in your location. But we also found that smaller touches—the quality of the materials, the ease of adjustment, the locking and unlocking mechanisms, the readability of the mounting instructions, and the inclusion of all the correct mounting hardware—separated the excellent from the simply good. The mistake often made is to mount the TV far too high – this is because you’ll likely be decision-making while standing up. If you want the TV only a few millimetres or a fraction of an inch away from the wall you’re going to have to get a bracket that actually sits close to the wall when installed. In most cases, this won't be a problem, but depending on the house, you may find that the space between studs makes it difficult to mount a TV.