Makita XSF03Z 18V LXT Lithium-Ion Brushless Cordless Drywall Screwdriver (Bare Tool Only)

Product Information

With a weight of 3.7 pounds plus a battery of 1.4 pounds, it is somewhat heavier than its rivals, but it is designed for two-handed operation. There have been a few issues with jamming, particularly with the use of cheap collated screws. We would recommend Makita’s own screws for consistent performance. We thoroughly researched the latest products from the leading manufacturers of drywall screw guns in addition to some lesser-known brands and combined that research with ample firsthand experience with remodeling homes and hanging sheets of drywall. The brushless motor runs at 4,000 rpm and can drive collated screws (drywall and standard wood screws) from 1 inch to 2.125 inch long. Instead of the usual three-step depth setting, there is a variable dial. This gives the Makita auto-feed screwdriver great versatility and allows the user to compensate for the hardness of the material and set the depth precisely. Makita’s cordless drywall screwdriver is another high-quality tool aimed at professional users, but with a price that will appeal to keen DIYers. The long-life brushless motor runs at 4,000 rpm. At 3 pounds, plus a 1.4-pound battery, the tool is a little heavier than some, but it is still easy to manage. Cordless drywall screw guns can have either a brush or brushless motor, and there are important differences between the two. Brush motors were developed for corded tools. They are reliable and low cost. When cordless tools first appeared, existing brush motors were the obvious choice. The problem is that brushes cause friction and, as a result, heat, which doesn’t have much of an effect on a corded tool but saps energy from the battery of a cordless model.

While cordless drywall screw guns tend to be the more popular choice, DeWalt’s high-speed corded model has a range of features that make it an attractive option for those who want strong performance with minimal outlay. An important feature of most drywall screw guns is the nose cone, which surrounds the gun’s screwdriver bit. As the screw is driven into the drywall sheet, the nose cone provides a depth stop, so the screw head is sunk just below the surface (to be hidden by filler), but not driven too deep.

Makita DFR550Z LXT 18v Cordless Auto-Feed Screwdriver Body Only For 25mm - 55mm Screws

Key features are the adjustable screw holder that securely grips the screw while driving and frees up one hand. A thumb-operated bit changer rotates easily to any of six preloaded bits that then slide into place, ready for use.

Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge Cordless drywall screw guns are often sold as “bare tools” (without a battery or charger). If the user doesn’t already own compatible batteries, this can add a considerable amount to the price. Pay attention to the amp hour (Ah) rating of batteries. This can be compared to fuel: the higher the number, the longer the battery will run between charges.

Support

Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature The first is a device that is attached to the front of the drywall screw gun, allowing it to feed collated screws (screws held together in a magazine with a plastic or paper strip). With no need to fit screws manually, screws can be driven much faster, but the attachment can be removed if not needed. An auto-feed gun has a full-time magazine feed and can be more compact and lighter than a combined gun and attachment. However, they are more expensive. The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life A faster, more accurate solution is DeWalt’s 20V Cut-Out Tool, which is specifically intended as both a drywall drill and cutter. The brushless motor runs at 26,000 rpm, and the ergonomic design makes for easy control. There is a built-in depth gauge, tool-free bit changing, and an LED work light. Ahead, we explain the key features of these tools and look at some real-world examples to help you find the best drywall screw gun for your needs.