APC by Schneider Electric Smart-UPS On-Line Li-ion UPS - SRTL1000RMXLI - Uninterruptible Power Supply 1000VA (Rack-/ Tower convertible, 8 Outlets IEC-C13)

Product Information

Lithium battery management systems and battery monitoring systems, like Cellwatch and BTech, have the following similarities: This graph is based on actual measured runtime data. All measurements were taken with new, fully charged batteries and a balanced resistive load (PF = 1.0). Actual runtimes may vary from the values of this graph. Actual runtimes are dependent on several v Whether it’s a small server room or a large data center, reliability is a huge consideration for any piece of equipment, and these Lithium UPSs do not disappoint. Lithium batteries tend to have up to a two to three times longer service life, allowing for peace of mind regarding battery replacements. Cabinet Height: The LG cabinet is 95" (241 cm) tall as shipped. Since the batteries are not installed, the cabinet may be moved laying horizontally. Plan for moving this 225 lb (102 kg) cabinet through doors, onto small lifts, and note ceiling heights where the cabinet(s) will be placed. Remember that conduit will land on top of the conduit box on top of this 100.5" (255 cm) tall cabinet. Commercial/industrial ceiling heights are often 120" (305 cm), but not always. See customer drawing #110000683 for all dimensions and weights.

While Eaton brings a lot of cool features to the new 9PX-L series units, one of the most important aspects is how the unit handles a power failure scenario. The 9PX series offers two modes of operation, the first is double-conversion and the second is a high-efficiency mode. Both (can) monitor battery terminal temperature and cabinet ambient temperature and can warn of possible thermal runaway conditionsOverall though, this UPS does not disappoint with its reliability and ease of use. Setting it up out of the box is as easy as mounting the rails and throwing the unit onto them (or attaching the feet). After that, you just plug in the unit, and whatever devices need power, and other than management, you’re ready to go.

Below we’ve provided an analysis of some of the pros and cons of using li-ion batteries in UPS systems.

Lithium-ion operational functionality

When you switch the unit into high-efficiency mode though, the UPS is able to save a bit on power as it’s not always flowing energy through the inverter. The tradeoff for these power-savings is you will need to handle some amount of switchover time. We used the Quarch IEC Mains Power Analysis Module to monitor the voltage output from the Eaton 9PX6K-L during a brief power interruption.