ELMconfig USB device 500kbit/s ELM327 compatible interface with MS-CAN switch for Forscan FoCCCus OBD2 diagnostics …

Product Information

as I say may be wrong.... if I was right, the 2meg engine map would thus have or could have three elements to the map, While the Car Scanner ELM ODB2 is still in Beta version as I speak, it managed to work very well in our Windows laptop and smartphone. We were able to diagnose the OBD2 fault codes and read the sensor data in our fleet of test vehicles without encountering unusual errors. FORScan Lite for Android - attention: some functions are missing in FORScan Lite. Please see comparison of applications The FoCCCus software is no longer developed any further. There will never be full support for the MK3.5. I worked on a lot of cars, and I really mean a LOT! I started tinkering with cars in high school. My experience allowed me to test drive and diagnosis a multitude of makes and models, including prestigious German cars.

Turn on the car ignition but don’t start the engine! At this point, you can launch the ELM327 software. It will automatically detect the OBD2 reader and the vehicle ECU. ScanMaster-ELM is a OBD-2/EOBD diagnostic scan tool for vehicle diagnostics under OBD-II/EOBD standards that were developed specifically for the ELM327 chip from the company ELM Electronics. In conjunction with an ELM327 based interface ScanMaster an ideal OBD solution (also scan tool or OBD scanner called) to diagnose all OBD-2-capable systems and is very suitable as well for automotive repair shops, even for seasoned home and hobby mechanics. All control devices in vehicles that support OBD-2... PCMSCAN for Windows HS-CAN mode. Needs two modules to modify. (This was already enabled from factory on mine but this how you do it) I became particularly fond of the OBD2 system on modern cars. If your vehicle is 1996 or newer, you have an OBD2-compatible car. Without the OBD2 diagnostic system, it will be extremely hard to pinpoint the nuances in your car’s engine. When something goes wrong, it will all turn into a time-consuming guessing game. bug: VIN wasn't read from factory AB file when loading it in some versions of the Central Configuration functionForscan works on most Ford vehicles up most recent ones. DTC reading-erasing, service procedures, injector coding, DPF force regeneration and lot more. And it is FREE. Works on all Windows versions and some other operating systems as well. The software is updated often, new features added several times a month! Solder pin 6 (which you just de-soldered) to the middle pin on your switch (middle bottom in diagram)

EDIT* NOTE PuTTy is not needed for ELMconfig Program , once Elm327 is connected then select configure from the menu on startup of ELMconfig , this will send all commands to re-configure your ELM327. Before you modify the interface I suggest you get the Elm interface and the program working and talking to your car before modifying it so you can then access all modules. I then selected the Configuration & Programming menu from the vertical set of icons on the left of the Forscan window (the chip icon below the spanner icon) Having connected the ELM327 module to the PC USB port and car OBD port and launched Forscan, I switched the ignition on when prompted – on my keyless start model this meant pressing the power button without pressing the clutch

Need to know which software to download to use your wireless OBD2 scanner?

NOTE: Before using your Vgate vLinker FS for the first time with FORScan, you must install the latest FTDI Virtual COM Port Drivers and update the adapter firmware to the latest version. Ensure you update using a computer with a reliable power source. FTDI Virtual COM Port Driver Installation (vLinker firmware files v2.2.86): Actually the FW for the 140 & 163 is the same and just a couple of bits tell the ECU that is has to use the maps for the 140 resp 163 engine. So on Low Canbus i can goto some settings and onHigh Canbus i can goto the rest of the settings although i'm not sure what some of it is. I'm trying to enable cruise control on my Focus Mk2.5 1.6 TDCi, and am getting extremely slow speeds doing the initial step of "Read firmware from PCM to BIN-file". This update will show the radio or CD information in the instrument cluster display. This will only work on vehicles with the large displays. For example it will work on the display shown in this sections header image.

After the MK3.5 was introduced the FoCCCus software turned out to be not fully functional on the MK3.5. This is because of the different hardware and software version numbers of the MK3.5. At that time the original developer of the program did not plan to modify the program to work with the MK3.5.

Below you’ll find what we believe are the best free ELM327-compatible software for Windows, Android, and iOS devices. Best ELM327 Software for Windows Smartphones thinking more clearly.... there are three elements inside the PCM as I said, 1) Engine Map, 2) Immobiliser info 3) the disabled cruise control software. Service functions HVAC "Actuators Calibration","Reset the Outside Air Temperature Sensor Learned Values" for: bug: incorrect work of sevice functions "Read/Change Fuel Injector Correction factors" for Kuga 1.5 TDCi StgVI 2017+ model year

Elmconfig is a program written by a guy on a Ford Focus forum (civil-zz) that uses the widely available ELM OBD reader/controller interface. Not only is this a useful DTC code reading tool but also a handy programming tool to modify various options and to enable features on Ford cars. Please do not attempt any mods unless you are comfortable to do so. Do any mods at your own risk. Reverse Rear Wiper Initial Wipe (Enabled/Disabled) – If auto wipers enabled, and car is put into reverse, rear window wiper will wipe (if rain is detected)This is the main screen of ELMConfig – Along the left hand side is the main module navigation, with the Low CAN & High CAN modules. Below this, you can read the fault codes within each module, and also clear the codes to prevent the warning lights showing. What i saw was >K followed by what i typed each time , i had to over write the commands each time twice before i got each one to OK or >K ELMConfig can't open a connection to the adapter at all, no matter which mode or laptop I try (Yes, FORScan is closed when I try to use ELMConfig). In all cases, it pops up an error saying "Correct response from adapter timed." Usually, the request and response are both empty, as in this screenshot I took: If i mess up my ECU (for which i have not seen one single post that this has happened) then it will be my fault. a lot of configurations altered (chime beeping continuously in reverse gear; speed warning chime at 120 km/h; the 5 km/h offset is gone; the engine is cutting off at 7000 RPM – normally it could run up to 8000 RPM – ; I got an extra menu item, “hill launch assist”, which would be nice, if it would work)